Ground mount, roof mount, carport, and ballasted — engineered to your local wind, snow, and seismic code. All from one factory in Xiamen, all shipped port-direct.
Pile-driven, concrete-base, and bolted ground mount structures engineered for utility-scale solar farms, commercial fields, and agrivoltaic projects. Both galvanized steel and aluminum-magnesium-zinc coated options available, with adjustable tilt configurations from 10° to 40°.
C-section galvanized steel structure on pile-driven foundation — the workhorse for utility-scale solar farms on stable soil.
| Main Material | Q235B / Q355B steel |
| Surface Treatment | HDG Z275–Z600 |
| Tilt Range | 10° – 40° adjustable |
| Wind Load | up to 60 m/s (2700 Pa) |
| Snow Load | up to 1.4 kN/m² |
| Warranty | 10 years structural / 15 years anti-corrosion |
Pre-cast or cast-in-place concrete foundation with bolted galvanized steel uprights. Best for rocky terrain or sandy soil where pile driving is not feasible.
| Main Material | Q355B steel |
| Surface Treatment | HDG 85 μm avg. |
| Tilt Range | 15° – 35° fixed or adjustable |
| Wind Load | up to 55 m/s (2400 Pa) |
| Snow Load | up to 1.6 kN/m² |
| Warranty | 10 years structural / 15 years anti-corrosion |
Lightweight 6005-T5 aluminum triangle ground mount — corrosion-proof, easy to ship and install. Ideal for coastal projects and small-to-mid commercial sites.
| Main Material | Aluminum 6005-T5 |
| Surface Treatment | Anodized 15 μm+ |
| Tilt Range | 10° – 30° fixed |
| Wind Load | up to 50 m/s (2100 Pa) |
| Snow Load | up to 1.2 kN/m² |
| Warranty | 10 years structural / 15 years anti-corrosion |
High-clearance ground mount (2.5–4 m) designed for farming under the array — livestock, greenhouse, or row crops compatible. Custom span engineering.
| Main Material | Q355B steel + Al rails |
| Surface Treatment | HDG + Anodized |
| Clearance Height | 2.5 m – 4.5 m |
| Span | up to 12 m custom |
| Wind Load | up to 45 m/s (1700 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Low-shading rear-side design with single beam back support and minimal cross-bracing — boost rear-side energy yield by up to 12% for bifacial modules.
| Main Material | Q355B steel |
| Surface Treatment | HDG / Al-Zn-Mg coat |
| Tilt Range | 20° – 35° fixed |
| Module Type | Bifacial 540 W – 700 W |
| Wind Load | up to 55 m/s (2400 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Manually adjustable tilt (4 positions, e.g. 10°/20°/30°/40°) for sites at high or variable latitude. Squeezes 6–8% extra annual yield with no moving parts, no electronics, and no maintenance overhead.
| Main Material | Q235B steel |
| Surface Treatment | HDG Z275+ |
| Tilt Positions | 4-step manual adjust |
| Wind Load | up to 50 m/s (2100 Pa) |
| Snow Load | up to 1.4 kN/m² |
| Warranty | 10 years structural / 15 years anti-corrosion |
Compatible with every common roof type — trapezoidal metal, standing seam, corrugated, clay/concrete tile, slate, and flat concrete. Both penetrating and clamp-on non-penetrating options. Engineered to minimize point loads and protect the roof warranty.
Non-penetrating aluminum clamp grips the seam directly — zero roof drilling, zero leak risk. The premium choice for metal industrial rooftops.
| Material | Aluminum 6005-T5 |
| Clamp Compat. | Kalzip, Klip-Lok, Ribloc, etc. |
| Roof Penetration | None |
| Wind Uplift | up to 2.4 kPa |
| Install Speed | ~ 100 modules / day / crew |
| Warranty | 10 years structural / 15 years anti-corrosion |
L-foot bracket fixed to the trapezoidal roof rib with EPDM washer and self-drilling screws. Compact, fast install, suitable for commercial and residential metal roofs.
| Material | Aluminum 6063-T5 |
| Bracket Type | L-foot + EPDM seal |
| Fastener | SS304 self-drilling screw |
| Wind Uplift | up to 2.1 kPa |
| Compat. Modules | Framed 30–40 mm |
| Warranty | 10 years structural / 15 years anti-corrosion |
Stainless steel tile hook for clay, concrete, and slate roofs. 3-axis adjustable head fits irregular rafter spacing. Optional flat-tile and S-tile profiles.
| Hook Material | SS304 / SS316L |
| Rail Material | Aluminum 6005-T5 |
| Adjustability | 3-axis (X / Y / Z) |
| Compat. Tile | Clay, concrete, slate |
| Wind Uplift | up to 1.8 kPa |
| Warranty | 10 years structural / 15 years anti-corrosion |
Penetrating or chemical-anchored triangle frame for flat concrete and bituminous roofs. Custom tilt 5°–30°, optimized row spacing for shading-free layouts.
| Frame Material | Aluminum 6005-T5 |
| Anchor Type | Chem. anchor / weld plate |
| Tilt Range | 5° – 30° |
| Wind Uplift | up to 2.2 kPa |
| Module Layout | Portrait / Landscape |
| Warranty | 10 years structural / 15 years anti-corrosion |
Hanger bolt with EPDM seal and double-rail rack for corrugated steel and aluminum roofs. Adjustable bolt height clears coatings and rib heights.
| Bolt Material | SS304 hanger bolt |
| Sealing | EPDM double washer |
| Rail Material | Aluminum 6063-T5 |
| Wind Uplift | up to 1.9 kPa |
| Roof Pitch | 3° – 30° |
| Warranty | 10 years structural / 15 years anti-corrosion |
Low-tilt (10°/15°) east-west butterfly layout for flat industrial roofs — packs ~30% more modules per m² than south-facing tilt systems.
| Material | Aluminum 6005-T5 |
| Tilt | 10° / 15° east-west pair |
| Mounting | Ballasted or anchored |
| Module Density | ~ 200 W/m² |
| Wind Uplift | up to 1.8 kPa |
| Warranty | 10 years structural / 15 years anti-corrosion |
Architectural-grade solar carports for shopping malls, corporate campuses, EV charging hubs, residential complexes, and public parking lots. Single-column (cantilever), double-column, and T-type structures available in galvanized steel or aluminum.
Single-row cantilever design with one column line — leaves the other side fully open for vehicle entry. Premium aesthetics for showrooms, hotels, and offices.
| Structure | Cantilever, Q355B steel |
| Span (W) | up to 5.5 m |
| Slot Length | 2 / 4 / 6 cars per bay |
| Drainage | Hidden gutter optional |
| Wind Load | up to 45 m/s (1700 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Two-row column layout for wide parking aisles — most economical $/W solution for utility-scale corporate or public parking lots.
| Structure | Portal frame, Q355B |
| Span (W) | up to 11 m |
| Length | Modular 5 m / 10 m / 15 m |
| Vehicle Layout | Double row, head-to-head |
| Wind Load | up to 50 m/s (2100 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Single central column with inverted-T canopy — symmetric, sculptural, and visually distinctive. Common for residential complexes and architectural showcase projects.
| Structure | Central column, butterfly canopy |
| Span (W) | 5 m × 2 sides |
| Tilt | 5°–10° symmetric |
| Foundation | Single central pile |
| Wind Load | up to 42 m/s (1500 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Non-penetrating ballasted mounting for flat concrete and bituminous roofs where the roof warranty or membrane integrity prevents drilling. Concrete ballast blocks anchor the array against wind uplift — installed in days, with zero roof penetration.
Low-tilt 10° tray system minimizing wind exposure on tall buildings. Ideal for warehouses and logistics centers with restricted roof loading capacity.
| Tilt | 10° fixed |
| Material | Aluminum 6005-T5 |
| Ballast Weight | ~ 10–22 kg per module |
| Roof Penetration | None |
| Wind Uplift | up to 1.5 kPa |
| Warranty | 10 years structural / 15 years anti-corrosion |
Butterfly east-west layout combined with ballast trays — high module density (~200 W/m²) and uniform wind profile reduce required ballast weight by up to 30%.
| Tilt | 10° east-west pair |
| Material | Aluminum 6005-T5 |
| Density | ~ 200 W/m² |
| Wind Uplift | up to 1.8 kPa |
| Roof Load | 15–25 kg/m² |
| Warranty | 10 years structural / 15 years anti-corrosion |
Pre-cast concrete ballast block ground mount for sites where pile driving and excavation are not permitted (sealed land, landfill caps, contaminated soil).
| Ballast | Pre-cast concrete blocks |
| Tilt | 15° – 25° fixed |
| Material | HDG Q355B steel |
| Excavation | None |
| Wind Load | up to 45 m/s (1700 Pa) |
| Warranty | 10 years structural / 15 years anti-corrosion |
Building-Integrated PV is a custom-engineering business — every project is unique to the architect's drawing. We supply the structural sub-frame, mounting clamps, and waterproofing detail; you (or your PV partner) supply the modules and electrical balance. Below are the three BIPV applications we engineer most often.
Aluminum sub-frame for vertical and inclined PV facades on commercial buildings. Concealed mounting brackets, EPDM gasket waterproofing, and thermal-break profiles where required.
| Main Material | 6063-T5 / 6005-T6 aluminum |
| Surface Treatment | Anodized or PVDF powder coat |
| Typical Capacity | 50 kW – 2 MW per building |
| Module Type | Frameless glass-glass or framed |
| Waterproofing | EPDM gasket + drainage channel |
| Warranty | 10 years structural / 15 years anti-corrosion |
Steel / aluminum hybrid frame for solar greenhouses, agrivoltaic canopies, and farm shade structures. Engineered for span and clearance, with light-transmission ratio tunable to crop requirements.
| Main Material | Q235B steel + aluminum purlins |
| Surface Treatment | HDG Z275+ on steel |
| Typical Capacity | 200 kW – 5 MW per site |
| Span | Up to 12 m clear span |
| Light Transmission | 20% – 60% (configurable) |
| Warranty | 10 years structural / 15 years anti-corrosion |
PV pergola and sunshade canopy for outdoor commercial spaces, plaza shading, and high-end residential courtyards. Steel structure with aluminum decorative cladding options.
| Main Material | Q355B steel / 6063 aluminum |
| Surface Treatment | HDG + PVDF coating |
| Typical Capacity | 10 kW – 500 kW per site |
| Configuration | Cantilever, double-column, T-type |
| Module Layout | Mono-pitch or butterfly |
| Warranty | 10 years structural / 15 years anti-corrosion |
How BIPV projects work with us: send your architect's drawing, module spec, and target capacity. We return a structural design, BOM, and quote within 5 working days. BIPV typically requires more design iteration than standard mounting — budget 2–3 rounds of drawing review before production.
Complete the balance of system with our in-house extruded clamps, connectors, grounding components, and cable management. All accessories verified for compatibility with the mounting systems above and sized to your module dimension.
Aluminum 6005-T5 mid clamps for module thickness 30 / 35 / 40 mm. Anodized silver / black.
Adjustable end clamp matching mid-clamp height. Custom heights on request.
Frameless module hooks and edge protectors for glass-glass modules.
Internal and external rail splices for seamless long-row installations.
WEEB-style grounding lugs and bonding jumpers, sized per UL 2703 design requirements.
UV-resistant nylon cable clips and PV cable management trays.
L-foot brackets, hanger bolts, tilt legs, and adjustable rafter mounts.
SS304 / SS316L bolts, nuts, washers — full stainless fastener kit per project.
Our in-house structural engineering team accepts custom mounting requests starting from a single container. Whether you have an unusual module size (1500 W full-size, custom bifacial), an irregular site, or a roof condition no catalog covers — send us your drawing and we’ll respond with a custom BOM, structural drawing, and quote within 48 working hours.
Site location, capacity, module spec, roof/ground type, target tilt.
We run wind/snow load and seismic calc to your local code.
Structural drawing + BOM + CIF/FOB pricing within 48h.
4–6 week lead time. 100% QC photo/video reports. Port-direct.
Tell us your project parameters and we’ll come back with a structural design and a quotation — within 48 hours, no obligation.
+86 198 5923 5382 | Cain@flourish-solar.com